GYS U68049 Test & Charge Kit

Professional battery tester providing highly accurate results with in-built printer FEATURES: Battery 12 V : voltage test and state of charge. - Starter 12 and 24 V : test of the start voltage. - Alternator 12 and 24 V : test of no load voltage and charging voltage as well as current undulation during the charge. - Printour of the results using integrated thermal printer (no ink required). The microprocessor-controlled BATIUM range combines efficiency with security: The charging process is completely autonomous, no monitoring required. With a 50% shorter charging time compared to traditional chargers, the BATIUM guarantees ultra-quick and ultra-safe charging by providing a constant average current during the 'boost' phase. The BATIUM range ensures a 100% full charge for all lead-acid batteries (IwUoU curve); a standard 'automatic' charger (W2 or WU curve) only charges up to 90%. The BATIUM range is a microprocessor-controlled smart charger, it constantly analyses the battery's condition and regulates the charging process accordingly. Deeply discharged batteries in good, working condition (e.g. lights come on when the vehicle is stopped) could have a voltage as low as 1V. Our marketleading BATIUM range can charge from 1 V, whereas most chargers on the market cannot. Protected on-board electronics. There is no need to disconnect the battery from the vehicle, no risk of sparks or short circuits and no current supplied to the clamps unless they are connected to the battery's terminals.